|
STANDARD - Full bore technology
When to
choose STANDARD?
-
Most
equipment can be fitted with the FEMCO STANDARD
SYSTEM. Simply replace the factory fitted plug. No
special tools required.
-
Available in
all thread sizes: Metric, UNF, UNC, UNS, BSW, BSP,
NPT, etc.
-
Quantities
from 1 off.
|
 |
|
|
COMPACT - Full bore, low profile
When to
choose COMPACT?
-
If space
is limited, or if ground clearance is likely to cause
a problem fit Compact. Simply replace the factory
fitted plug. No special tools required.
-
Available in
all thread sizes: Metric, UNF, UNC, UNS, BSW, BSP,
NPT, etc.
-
Quantities
from 1 off.
|
 |
|
|
SPEED-CLICK - Quick push-on,
pull-off
When to
choose SPEED-CLICK?
-
Where
there is sufficient room, simply replace the factory
fitted plug with the FEMCO Speed-Click.
-
Available in
all thread sizes: Metric, UNF, UNC, UNS, BSW, BSP,
NPT, etc.
-
Quantities
from 1 off.
|
 |
|
|
XXL - Large thread size
When to
choose XXL?
-
Where
the is a large factory fitted drain plug with a thread
size of M34 or greater.
-
May be used
with a suction or oil change system.
-
Available in
all thread sizes: Metric, UNF, UNC, UNS, BSW, BSP,
NPT, etc.
-
Quantities
from 1 off.
|
 |
|
|
|
|
Is it possible to drain fluids
other than oil? |
|
Yes, of
course!
|
|
Can you drain oil from engines
with different plug sizes? |
Yes.
Femco plugs are available in all thread sizes, standard or
special.
|
|
How can I take an oil sample
to check the quality of oil in an easy way? |
The
Femco oil sampler makes this operation straight forward.
|
|
Is there a solution for plugs
in a difficult to reach place? |
Femco
provide angled and extended drainers. Special adapters are
also made to overcome most problems.
|
|
How can I catch the metal
debris in the oil? |
The
Femco plug is also available fitted with a magnet.
|
|
Is there a method of automated
oil change? |
Yes.
Femco E-L-V-I-S is a computerised oil change system. Use
in the workshop or installed in a service vehicle.
|
|
What happens if I get water in
my fuel tanks? |
Femco
is ideal for draining condensation from fuel tanks.
|
|
Which system should I use in
my situation? |
For
further information, please contact Diesel Allied
Industries to discuss your requirements.
|
PHONE: +61 3 8301 7670
